N e o n a t a l A n i m a t r o n i c N e w b o r n O f f s p r i n g
Animatronic Reborn Baby - N.A.N.O
Self Assembly Kit (27 printed pcs*)
- Eyelids
- Jaw movement
- Bottom Lip
- Head rotation
- Neck Tilt 2DOF
- Shoulder 2DOF each
- Elbows
- Legs w/Passive Knee's
+ PLUS five extra servo placements for smile, tongue or eyebrows actuators
Sale button will take you to an external link where you can complete your purchase.
£445.99 £369.98
*This model has been designed and manufactured to be 3D Printed using SLS technology. With this chosen printing method it allows the whole model/file to be printed in one go. Some of the parts are designed (joined) together, like hinge points and count as one part. You should receive 15 parts of which will be made up of 27 separate pieces.
This is a self assembly kit. We only sell the 3D Printed Mechanical Structures that you will require to build your NANO.
Servo motors, Electronics, Etc are sold separately.
If you would like to receive a fully assembled one please contact us for quotation.
The mechanical HEAD rig will allow for "up to" 11x HS65MG/HB servos to be installed, however only 6 will be required for full control.
FUTURE PROOF:
Additional spaces have been designed into the mech to allow for expansion 'should you wish to apply other features to the rig.
The mechanical BODY will allow for 5x HS***MG/HB Servos to be installed. We would recommend that you use a HS645MG servo for the neck however lower spec servos can be used for the shoulders and legs. (HS485HB - HS311HB)
Also you will require 4x HS65MG/HB servos that fit into the arm to provide Shoulder and Elbow actuation.
There are standoffs measuring at 47mm apart that is designed to hold an Arduino NANO Shield.
Required parts:
1x HS645MG Servo
10x HS65MG Servo's
4x HS311HB Servo's
4x 3x4x8mm Flanged bearings
-2mm Threaded Rod 30cm
-1mm Steel rod 200mm
-M2 Threaded ball joints
-M3 Bolts, washers and nuts.
Power and Control boards (Arduino)
For additional safety 'Springs can replace the Threaded rods in some joints to help ease motor strain and hallow for better handling.
Product details:
Technical Data:
Material: Nylon
Weight: 535g (structure only)
Color: White or Black
Size: 415l x 235w x 110d (mm bounding box)
Heat Proof to 80℃ / 176℉
Depending on the shape of your model and orientation in the print tray, you might see print lines, or “stepping” phenomena on your model, which is a natural artifact of 3D printing using the SLS process. SLS printing works by printing layer by layer, and while our layers are around 0.12mm thin, there is a "step" between each layer, much like a staircase.
Looking for Code?
Download it here...
